Plumbing and Valves> Valve Settings: Normal | When Backwashing | When Vacuuming | When Using Spa

Pool Valve Settings

Valve Settings - Normal Pool Settings

In normal operation, water should be drawn in from the pool, but not from the spa. It should return to both the pool and the spa. This way the spa overflows into the pool. The drain on the spa is kept closed because if it was left open, the spa would drain back into the pool when the pool pump is turned off.

Return to filter shopping

Pool Cleaners
Match the right Pool
Cleaner to your pool.

Salt Systems!
Better swimmer
comfort and safety.

Pool Pumps
Check out your pump's
curves.

Pool Filters
Sand, D.E., or Cartridge?
Which is best for you?

Backwash Valves
Which type do you
prefer?

Pool Heaters
The heat is on!

Chemical Feeders
Consistency is the key.

Plumbing/Valves
All those valves and pipes
What do they do?

Timers/Controls
Make it easy on
yourself.

Water Chemistry
Balance is the key.

Pool Maintenance
Do it right and save time.

About Us
What They Are Saying...
Contact Us
Privacy & Security
Our Favorite Links

POOLplaza Inc. does not make any warranty or representation, either expressed or implied, regarding the accuracy or completeness of the information provided by this website; nor does POOLplaza Inc. assume any liability of any kind whatsoever related to, or resulting from, any use or reliance on this information. The content of this website should not be used, if it is conflict with any applicable federal, state or local regulations or guidelines.
Copyright © 2000 POOLplaza Swimming Pool Supplies - Dallas,TX. All rights reserved. Terms and Conditions