Jandy
brand valves are the standard of the pool industry.
These valves
are fully serviceable and the NeverLube valves require no regular
maintenance.
Jandy
valves are designed so that you can glue a pipe to the inside of the
valve port or a fitting to the outside of the port.
The 1.5 x 2.0" valve takes a 1.5" pipe on
the inside of the port or a 2.0" fitting on the outside of the port.
This
design makes the valve body re-usable if you have to cut it out and
replumb it. The Jandy, Compool, and Hayward valves all operate
in a similar fashion.
<> Contact Us <> About Us <> What People are Saying <> Links <> <> Your Privacy & Security <> Installation/Repairs <> POOLplaza Inc. does not make any warranty or representation, either expressed or implied, regarding the accuracy or completeness of the information provided by this website; nor does POOLplaza Inc. assume any liability of any kind whatsoever related to, or resulting from, any use or reliance on this information. The content of this website should not be used, if it is conflict with any applicable federal, state or local regulations or guidelines. Copyright 2000 POOLplaza.com Dallas, Texas All Rights Reserved <> 214-221-6900