AquaRite (Hayward and Goldline) Salt Chlorinators for Salt Pools
What makes the Goldline AquaRite system
1. Digital Salt Readout
The AquaRite system has a digital
salt readout on the control panel. This helps to give the pool owner a more accurate idea of the salt level
than a simple dummy light like most of the other systems have.
word of caution about the digital salt readout. If the cell gets scaled up or fails for some reason, it can
give a false low salt reading, even if the salt level is OK. Suppose you add a bunch of salt to the pool
(thinking the salt level is low when it is actually OK). What happens? Yup . . . now you have a salt
level that is way too high and now you have to drain the pool down. So while the digital readout is a nice
feature, we always recommend checking the salt level with a separate test kit before adding salt.
2. Pro-Logic Interface - Salt
Chlorination PLUS Electronic Controls at a Super Price
The AquaRite system is designed to
interface with their own Pro-Logic control systems. The beauty of the Pro-Logic systems
is that you can add a salt cell to any system and have salt chlorination at a much lower price than if you were to
install a stand alone salt system. See our controls
section for more information.
Sense and Dispense Chemistry Automation
Now Hayward offers a fully-integrated solution for sensing the ORP
(chlorine) and pH levels in the pool water and making adjustments to the feeding of chlorine and pH reducing
chemicals. This system continuously tests the water for the sanitizer and pH levels and makes adjustments that
keep the pool perfect all the time. How does this work? Click here.
does the AquaRite system work?
system creates a small amount of chlorine in the pool from the mild salt level that is in
the pool. When the chlorine is used, it turns back into salt, ready to turn
into chlorine again.
The cell reverses its
electrical polarity periodically to eliminate any scale buildup.
The control box
provides key information about the operation of the unit. This allows the homeowner
to know exactly what his happening with his salt system.
or Low Salt Warning
a Pool to Salt
Install the System
Raise Salt to 3000 ppm
Let the system do the work
AquaRite system uses a flow switch to keep the salt system off when there is
not enough flow in the piping.
For pools up to 40,000
Three basic units are
available; for pools up to 15,000 gallons, 25,000 gallons and 40,000 gallons
They can be used on either 115 or 230 volt systems.
115 VAC, 50/60 Hz, 2.0 amps
230 VAC, 50/60 Hz, 1.0 amps
24 VDC @ 8 amps maximum
1.45 Lbs per 24 hour (670 gm
/ 24 Hr.) on the 40,000 gallon model
The AquaRite system
carries a 3 year limited warranty on a prorated basis. Since warranty terms can change from year to year on any product,
please contact us at firstname.lastname@example.org for the most up-to-date
information on this product.
have any questions about your product selection, please call us at 1-800-394-6131.
If you are new to
this concept - start
by looking at our salt water pages in our ONLINE POOL SCHOOL. It contains a wealth of information about Salt
<> Contact Us <> About Us <> What People are Saying <> <> Your Privacy & Security <> POOLplaza Inc. does not make any warranty or representation, either expressed or implied, regarding the accuracy or completeness of the information provided by this website; nor does POOLplaza Inc. assume any liability of any kind whatsoever related to, or resulting from, any use or reliance on this information. The content of this website should not be used, if it is in conflict with any applicable federal, state or local regulations or guidelines. Copyright 2013 POOLplaza.com Dallas, Texas All Rights Reserved <> 214-221-6900